|
Products
Listed below are SES
products for abatement or remediation of
Lead-Based Paint, Asbestos, Mold and other Hazardous Surfaces. SE-110
+ SE-120 or SE-130 forms our flexible encasement system for ACM,
LBP and Mold.
|
| Product |
Description |
|
SE-110 Penetrating-Stabilizer – A water-based, non-toxic, dries-clear
primer that penetrates stabilizes and seals damaged painted surfaces,
friable fibrous insulation materials and treated mold surfaces. Suitable
where excellent adhesion is required on interior or exterior surfaces
including walls, eaves, ceilings, old or new wood, window sills, air
ducts, pipe insulation, asbestos fireproofing insulation, Transite, plaster
and concrete surfaces. |
|
SE-110-CI Multi-Surface Penetrating-Stabilizer with Corrosion Inhibitors - A Clear, non-toxic primer that penetrates, stabilizes and seals damaged painted surfaces while stopping corrosion on most surfaces. Suitable for application over Multiple-Surfaces, including wood or rusted steel surfaces. |
|
SE-120
Protective-Skin - A water-based, nontoxic, high-solids,
100% acrylic coating that remains flexible, will not crack,
chip or peel, mold-resistant and fire-resistant. Suitable
for application directly or over SE-110 or -CI primers on lead-paint,
asbestos or treated mold surfaces. |
|
SE-130
Protective-Skin - A satin finish, water-based, nontoxic, high-solids,
100% acrylic coating that remains flexible, will not crack, chip
or peel, mold-resistant and fire-resistant. Suitable for application
directly or over SE-110 or -CI primers on lead-paint, asbestos
or treated mold surfaces. |
|
SE-160 – A clear, high-gloss, mold-resistant topcoat that is used to
add dirt resistance to select surfaces (interior or exterior
surfaces). |
|
SE-170-MR – A high-gloss topcoat, forms a highly durable, washable, highly
dirt, weather and mold resistant surface, including for use on
select interior or exterior surfaces and marine duty (suitable
for foot traffic with multiple coats). |
MR
Additive Option |
Please
note that products SE-110, SE-120 and SE-130 are also available
with a halogen-free Mold-Resisting additive. Consult with SES
Representative. |
|
SE-150 Architectural Sealant (100% Acrylic Caulk) -
A fully compatible trowel grade caulk that is used to seal, fill and
repair any
surfaces that are to be encased (3-1/2 gallon tubs). |
|
SE-151 Acrylic Urethane Architectural Sealant - A high performance
urethane acrylic sealant. Specifically formulated to provide the ultimate
in adhesion and durability (10.3 Fl. Oz tubes - 12 per Case). |
|
SE-310 Satin Finish – A satin-finish topcoat that is
used for added protection from airborne dirt on selected surfaces. Suitable
for interior or exterior service. |
|
SE-Industrial
Cleaner - A concentrated, non-corrosive, water-soluble
bio-degradable cleaner that's used to wet-clean and prepare surfaces. |
|
SE-C*R
Soluble Salts Remover - A water based additive for
use in pressure washing or scrubbing of metal surfaces, efflorescing
brick and mortar. Greatly facilitates the removal of soluble
surface salts such as chlorides, nitrates and sulfates from
surfaces. Salt detection Test Kits available. |
|
SE-PF Polyester Reinforced Fabric - A 100% polyester fabric
with outstanding physical strength properties, quick wet-out and saturation
characteristics, easy to apply (4” or 20” wide x 320 foot long rolls). |
|
SE-3000 is a water based, safe to use Highly-Heat Resistant coating (3000°F), VOC = 0.00%, no lead or chromates, black or custom colors.ors available. |
|
SE-FE is a 2-Component, Zero VOC’s, Solvent-Free Flexible Epoxy in dark gray or custom colors - 3 gallon kits (2 + 1 gallon). |
